PowerPaul Battery Trays

DescriptionTailor-made trays to suit our batteries.Each tray is made from 1.5mm thick powder coated STAINLESS STEEL. It has 4 mounting holes in the base. There’s a 5mm thick EVA foam pad for the base that is not attached, but has a sticky base ready to put in place. The sides are lined with 3mm EVA foam to prevent scuffing or rattling. The trays are a good loose fit to allow various different ways of feeding the strap through the slots.It also comes with a 1.5m buckle type strap that allows you to tie it down in any orientation. The remainder of the tie can then be bundled and cable tied in place or you can trim it to length if you prefer (always seal the trimmed end with heat).The sides are 25mm tall which is plenty to prevent movement (in line with coming regulations), but also short enough to allow easy manoeuvring of the battery into place in tight spots.There are slots along all sides so you can position the strap in any orientation.Scout tray external dimensions – 350 x 192 x 25mm. (Scout tray also suits Cabin)Cub tray external dimensions – 335 x 180 x 25mm